Plastic Indoor Retro Reflective Photoelectric Sensor Easy Installation

Product Categories

QINGDAO DASS SENSOR TECHNOLOGY CO.,LTD.

Contact Now

Name: Plastic Indoor Retro Reflective Photoelectric Sensor Easy Installation
Brand: DASS
Price: 10 USD

Add to Cart

DS-G• Long sensing distance that is approximately 8 times that of our conventional model (for the Through-beam and Diffuse-reflective models).

(Through-beam: 40 m, Retro-reflective: 7 m, and Diffuse-reflective: 2.5 m.)

• Improved visibility:

• A red LED that makes the spot visible.

• Large indicators that can be seen even from a distance.

• Improved operability.

(Enlarged sensitivity adjuster and operation selector)

• Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).

(Additional types added to the DC type lineup.)

• Models with infrared LEDs are also available.

Model	NPN	DS-U81	DS-U82	DS-U83	DS-U84	DS-U85	DS-U86	DS-U87	DS-U88
	PNP	DS-U81P	DS-U82P	DS-U83P	DS-U84P	DS-U85P	DS-U86P	DS-U87P	DS-U88P
Sensing distance (slot width)		5mm(slot width)
Sensing object		Opaque: 2 × 0.8 mm min.
Differential distance		0.025mm
Light source		GaAs infrared LED (pulse lighting) with a peak wavelength of 940 nm
output way		N=NPN.NO.NC P=PNP.NO.NC
voltage		5 to 24 VDC ±10%, ripple (p-p): 10% max.
Current consumption		Average: 35 mA max(NPN).; Peak: 30 mA max.(PNP)
Ambient illumination		1,000 lx max. with incandescent light on the surface of the receiver
Ambient temperature range		Operating: −25 to +55°C Storage: −30 to +80°C
Ambient humidity range		Operating: 5% to 85% Storage: 5% to 95%
Vibration resistance		Destruction: 20 to 2000 Hz, 1.5-mm double amplitude for 2 h each in X, Y, and Z directions
Shock resistance		Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions
Degree of protection		IEC IP50
Connecting method		Pre-wired (standard cable length: 1 m)
Response frequency		1 KHZ min(Average 3 KHZ)
Weight		29g
Control output		NPN voltage output: Load power supply voltage: 5 to 24 VDC Load current: 100 mA max. OFF current: 0.8 mA max. 100 mA load current with a residual voltage of 0.8 V max. 40 mA load current with a residual voltage of 0.4 V max,
Material		Shell material:PBT/ABS Pervious to light part:PC

Product Tags:

reflective optical sensor

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	QINGDAO DASS SENSOR TECHNOLOGY CO.,LTD.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Retro Reflective Photoelectric Sensor products from this supplier

Find Similar Products By Category:

Electronic Components & Supplies

Hot Searches: